HKS EVC 6-IR 2.4 Colour Boost Controller

Return-to stock

Boost pressure setting returns to stock pressure value when the unit is off.

Speed Single Input

Speed signal input enables the boost control with the speed. (500km/h)

Scramble

The boost pressure can be increased by a designated value above the set value.

Map Correction

Input of the throttle signal and engine RPM or vehicle speed signals enables the boost control by a 3D map using 2 these signals as axes.

3-mode Boost Setting

Boost pressure can be set in 3 different modes to use them for different conditions.

Triple Digital Meter

3 digital data readings of surge tank pressure and throttle angle, engine RPM or vehicle speed can be displayed in real time.

3-mode Offset Setting

The differences between the boost pressure set value and actual value can be offset in 3 different modes. This ensures more precise setting.

Bar Graph Selection

Select the type of a bar graph from the boost pressure, throttle angle, engine RPM and vehicle speed.

Warning

If the boost exceeds the warning value, an audible beep and visible warning display notify the user. Also, the boost is lowered to the stock value or a preset value to prevents damage to the engine.

Bar Graph Peak Hold

The bar graph displays the maximum value after it is reached. It can achieve easy instant recognition.

Throttle Signal Input

Throttle position sensor signal input enables the boost control with the throttle angle.

After Image

The maximum positive boost value is displayed for 3 seconds when the boost changes from positive pressure to negative pressure.

Engine RPM Signal Input

Engine RPM signal input or ignition signal input enables the boost control with the engine RPM. 
(1 to 8 cylinders/up to 12000rpm)

Data Memory

All settings are stored in the internal memory; so settings will not be lost even when the ignition is off or the battery is disconnected.

Display Brightness Selection

Select the display unit’s brightness from 2 levels.