Showing 33–64 of 1596 results
This turnbuckle will fit many applications with a 6.1mm diameter hole and a rod length of 75mm (Measured from the center of the hole to the end of the turnbuckle). It has an internal 1/4 UNF thread with a length of 52mm
This turnbuckle will fit our range of actuators. It has an internal 1/4 UNF thread. The pin diameter is 7.9mm. Please state the turnbuckle length (Measured from the center of the hole to the end of the turnbuckle) when ordering this product.
A servicable turbo actuator for the Land Rover Discovery and Defender TD5 Engines. With many issues of internal corrosion in the original fitment unit, you may not be aware that you are losing power. Our actuator is a simple and quick fit solution. This product is built with a predetermined actuator spring suitable for at, or slightly…
Designed by Forge to replace the original component this uprated actuator is serviceable and guaranteed for life. It comes with an uprated diaphragm and a billet CNC machined aluminium mounting bracket. Fits EVO 5-6-7-8 This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can…
Designed by Forge to replace the original component on the Renault Megane 225&RS250, this uprated actuator is serviceable and guaranteed for life. It comes with an uprated diaphragm and is machined from an aluminium billet. The mounting bracket is made from stainless steel. This product is built with a predetermined actuator spring suitable for at…
A replacement actuator made from polished alloy for the Saab 9000 Aero complete with stainless steel mounting bracket. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot…
Designed by Forge to replace the original component on the 2006/07 model year Subaru Impreza WRX STi fitted with the VF43 turbo, this uprated actuator is serviceable and guaranteed for life. This product is built with a predetermined actuator spring suitable for at or slightly above factory boost levels. The actuator can be assembled with…
A replacement turbo actuator for the MK2 Ford Focus RS. This actuator, using a range of available springs this actuator can be tuned to suit your requirements. Unless an alternative spcification is requested, this product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee…
Forge Motorsport turbo wastegate actuator for the Ford Focus RS Mk3 Produced in house with our modern CNC machinery ensures the body and stainless steel rod with fittings provides a perfectly fitting serviceable and upgradeable replacement part. This wastegate actuator is assembled with a predetermined actuator spring suitable for or slightly above factory boost levels….
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee…
Our uprated valve for the Hyundai i30N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, but also fits the 2018 Kia Stinger 2.0L, this valve can be used either as a fully atmospheric (blow off) valve, or a…
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner. Forge Motorsport Atmospheric blow off valve for the Audi S4 B9 and Audi S5 B9. This product is a solenoid operated valve that integrates seamlessly with the OEM electronics resulting in absolutely no-fault codes, no check engine lights, and no detriment…
This valve is for the turbocharged 1.6-litre EcoBoost petrol engine found in the Fiesta ST. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the…
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner Designed specifically for the AMG A35 enthusiast Forge Motorsport are proud to release another Mercedes performance enhancement available in either atmospheric or recirculating versions. Developed and manufactured in Great Britain this product comprises of a 100% billet piston solenoid operated valve…
This installation requires the removal of the OEM DV. It is our recommendation that the OEM valve is removed and replaced with the blanking plate supplied in this kit. Developed and machined by Forge engineers in our UK CNC machine shop, the valve features our unique robust twin piston design, which allows for fine-tuning with…
This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot…
A replacement turbo actuator for vehicles based on the MK5 Golf chassis with the 2.0 FSi engine. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is…
A replacement blanking cap for the FMDVSPLTR valve.
Manufactured from 6082 aerospace grade aluminium No engine check lights (EML) All components have been made in the UK Fits engine code GME Lifetime warranty FMSP3 is the Forge Motorsport Blow off adaptor for the Alfa Giulia/Stelvio & Jeep Wrangler 2.0T. The spacer is a pressure release system that has been designed by our CAD team and utilises a…
Yet another first for the Volkswagen and Audi Tuning Market from Forge! With the introduction of the VAG 1.4 litre TSi Turbo / Supercharged Engine, we have developed an Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to…
Yet another first for the Volkswagen and Audi Tuning Market from Forge! With the introduction of the VAG TSi Turbo Engine, we have developed a Patented Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible…
The FMDVMCS is a sandwich type adaptor that fits between the existing electrical solenoid and the turbo charger housing on the BMW Mini Cooper S N14 engines 2007/08(R56/57 *), Peugeot 1.6 turbo engines as found in the 207 and GTI , 208 GTI, 307, 308 and Citroen DS3. This product is not suitable for the…
A Blow Off style adaptor plate, designed for installation in combination with the OEM solenoid valve which will generate the “whoosh” or dumping noise. This adaptor is suitable for installation to: Fiat 500 Multiair Engines (not compatable with Multijet engines) Fiat Punto EVO Multiair
This Blow Off valve is for the Citroen DS3 1.6 Turbo engines, that have the electronically controlled bypass valves. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. The problem…
Forge Motorsport are pleased to offer a Blow Off Valve (BOV) Adaptor for the Mercedes 2.0 litre Turbo GDi engine as found in 2014 onwards Mercedes CLA250 C117 A180 A250 GLA250 This product is machined From Solid Billet Aluminium , and includes: Longer Stainless Steel Hex Bolts High Quality O-Ring Seals The spacers were developed to produce the…
End of content
End of content
Subscribe to our newsletter and get the latest trending products and offers updates.
We care about your privacy
In order to provide you a personalized shopping experience, our site uses cookies. By continuing to use this site, you are agreeing to our cookie policy.
